We Offer Printed Circuit Board Standard Capabilities To Better Suit All Of Your PCB Needs

AllWinPcba is equipped with advanced machines and software from the United States, Japan, Taiwan, EU, and Israel.

2Our state-of-the-art assembly equipment enables us to better suit all your PCB needs under one roof in an inexpensive way. Our Printed Circuits Boards Assembly Capability includes but is not limited to what is listed below, as we are updating our equipment constantly to keep us on the cutting edge. Look forward to cooperation with you, Don't hesitate. If you have any needs for PCB manufacturing and PCB Assembly, please contact us at svc@allwinpcba.com. We will respond to you within 24 hours.

FR-4 PCB Capabilities & Standard PCB Capabilities

Category Capability Notes
FR-4 Base material for PCB.
Number of Layers
1-10 layers
The number of conductive.
TG130-140, TG150-160, TG170-180
Taconic, Rogers, ARLON and other HDI board, please contact AllWinPcba for details
Max PCB Size
Single&Double layers:1150mm*500mm


Please contact AllWinPcba, any sizes beyond this dimension.
Min PCB Size
Board Size ToleranceOutline
±0.2mm for CNC routing
±0.5mm for V-scring

If you have any other requstion, please contact AllWinPcba.
Board Thickness
Customized PCB thickness and number of layers are acceptable.
Board Thickness Tolerance
Thickness≥1.0mm: ±10%
Thickness<1.0mm: ±0.1mm

Normally PCB processing steps such as electroless copper, solder mask and other types of finish on the surface occurs result in tolerance.
Outer Layer Copper Thickness


PCB thickness≥1.2mm,

Via size≥0.25mm,

Min Track/Spacing≥0.15mm
Also known as copper weight. 35μm=1oz, 70μm=2oz, 105μm=3oz, if you need copper weight greater than 3oz, ples contact us.
Inner Layer Copper Thickness
The weight (in ounces) of copper present in one square foot of area. This parameter indicates the overall thickness of copper on the outer layer.
Surface Finish
HASL, Immersion goldENIG, Immersion Tin, OSP, Immersion SilverAg, Electroplating Hard Gold/Soft Gold, Gold Finger, Selective OSP, ENEPIG
Extra process to exposed copper to help solderability.
Solder Mask
Green, Red, Yellow, White, Black, Blue, Purple, Matte Green, None
The color of coating material.
Solder Mask Thickness
If you have any special request, please contact AllWinPcba.
Finished Hole Size Tolerance(CNC)

Finished Hole Diameter(CNC)
1:PCB Thickness=2.0mm, Min hole size is 0.3mm
2:PCB Thickness=2.4mm, Min hole size is 0.4mm

Min Hole Size
Minimum diameter of holes.
Min Track/spacing
Minimum width of any conductors/Minimum distance between any two adjacent traces.
White, Black, None
There no extra charge.