New here ? Getting $50 coupon
High-speed. Only 30 minutes for the materials to arrive at the ALLWINPCBA SMT workshop from ALLWINPCBA
component storage center.
Well-known brand GKG printing machines are used. Processable PCB size: minimum 50 * 50mm,
maximum 400 * 340mm. The repeat positioning accuracy of this equipment is up to ± 0.01mm, and the
printing accuracy is up to ± 0.025mm.
Stiger 510D is used for automatic solder paste inspection. Its CCD camera has up to 5 million pixels
and can detect the smallest element 01005 (inch), CPK> 1.33, GR≤10%. Many inspection items are
available, such as volume, area, height, offset, short circuit, flatness, etc.
ALLWINPCBA strictly in accordance with the inspection standards for the production of the first, patrol products.
Siemens high-speed placement machines are used. Attachable component size: minimum 01005 (inch), maximum 45 * 87.5mm. The support maximum PCB size is 1200 * 460mm. The placement speed is up to 45300CPH, and the precision is up to 37.5μm.
JT reflow soldering is used. Temperature control, 10 temperature zones above and below. The temperature is controlled from room temperature to 300℃, and the temperature precision is controlled within ±1℃. The heating time is only 25Min.
Ensure that the production model and the attached components are fully consistent with the customer's assembly drawings and BOM.
Octavia is used to perform AOI inspection on SMT. Its camera is a 5 megapixel industrial camera with a resolution of 15 μm. It mainly detects errors, leaks, reverses, deviations, tombstones, damage, empty welding, and foreign objects.
AX equipment is used. The maximum PCB size can be detected is 510*420mm, and the magnification rate is 420X.
JT wave soldering is used. The size of soldering PCB is 50-350mm.The temperature can range from room temperature to 280℃, and the heating time is 110Min.
There are many types of solderable components, supporting heat sink, crystal, USB, VGA, etc. Mutual quality inspection between different processes, high pass rate of products at one time.
SF Express is used domestically while DHL is used internationally to pursue the fastest speed.
With high accuracy and high stability, GKG G5 followed in the SMT industry is the development trend of a new generation of fully automatic printing machines.
Quote Now
From 0 to 300 degrees celsius, Digital Control System and Temperature Monitoring ensure the stabilization and accuracy of repetitive precision and the quality of soldering.
Quote Now
The real-time SPC information display, complete, and various SPC tools allow users to real-time monitor problems, reduce the defects caused by bad solder paste printing.
Quote Now
TRI's solution delivers the fastest hybrid PCB inspection combining optical and blue-laser-based true 3D profile measurement for the highest automated defect symptom coverage possible.
Quote Now
By the end of 2020, ALLWINPCBA has more than 800 employees, served over 120,000 users from more than 130 countries and regions worldwide.
Quote Now
ALLWINPCBA has developed Multi-module Wuji IoT System independently,consisting of an intelligent quote system, which greatly improves production efficiency and reduces production cost.
Quote Now
ALLWINPCBA provides customers with more than 40 sorts of components with over 200,000 products purchased from formal channels, as well as ordering and purchasing services.
Quote Now
